+86 0371 8654 9132

replacement of sand by marble powder pdf

Partial Replacement of Fine Aggregates by Marble Powder in ...

dust used as fine aggregate in replacement of natural sand, as the sand is expensive because of the excessive cost of transportation from natural sources. Marble powder also has cementitious properties and may help in binding the aggregates. The marble powder can improve various properties of concrete viz; compressive strength, flexural

Experimental Study On Concrete Using Waste Marble powder ...

of using marble powder waste as partial replacement of fine aggregate in concrete. Since this concrete is prepared with marble powder as a partial replacement of fine aggregate (Sand) in four different proportions i.e. 10%, 15 % ,20% and 25 % and tested for the period of 7days, 14 days and 28 days.

Use of Waste Marble Powder as Partial Replacement in ...

the partial replacement with sand having 10% marble dust powder. But the split tensile strength decreased for the mix which contains 20 % marble powder dust against cement (10%) and sand (10%) by 11%. Hence result shows that marble powder when mixed with sand and cement together

(PDF) IJERT-Use of Waste Marble Powder as Partial ...

Hence result increased by the value of 9.2% and for 10% replacement with shows that marble powder when mixed with sand and cement sand the flexure strength also got increased about 9.3% but it together has low compressive strength as compared to the decreased when the mix contains 20% marble powder dust replacement of marble waste in cement and ...

Partial Replacement of Fine Aggregates with Quarry Dust ...

river sand. Quarry dust and Marble powder contains similar properties as that of river sand and hence accepted as a building material. The present paper focuses on investigating maximum percentage replacement of river sand by Quarry dust and Marble powder in varying equal percentages 0%, 10%, 20%, 30%, 40%, 50%, and 60% for M25 mix designations.

Experimental Utilization of Marble Dust Powder as Partial ...

20% marble powder dust as partial replacement of cement and sand together and also MX3 with 15% marble powder as partial replacement of sand, MX4 with 15% marble powder dust as partial replacement of cement and MX6 with 30% marble powder dust as partial replacement of cement and sand together. S.No. Characterist ics Specified value as per IS ...

(PDF) "Partial Replacement of Cement with Marble Dust Powder"

In order to evaluate the effects of the marble powder on mechanical behaviour, many different mortar mixtures were tested, all prepared with sand to cement ratio of 3:1 at about the same workability.

Partial Replacement of Fine Aggregates by Marble Powder

dust used as fine aggregate in replacement of natural sand, as the sand is expensive because of the excessive cost of transportation from natural sources. Marble powder also has cementitious properties and may help in binding the aggregates. The marble powder can improve various properties of concrete viz; compressive strength, flexural

STUDY OF MARBLE POWER AS PARTIAL REPLACEMENT FOR

STUDY OF MARBLE POWER AS PARTIAL REPLACEMENT FOR CEMENT MORTAR USING M-SAND GLADWIN ALX. A 1, BASKAR. ... [1-10].In the studies performed using NA, it was found that the powder increased compactness of the aggregate-cement paste interface, and also improved the modulus of elasticity and early age ... Replacement of Sand by M-Sand Comp. Strength ...

Experimental Utilization of Marble Dust Powder as Partial ...

20% marble powder dust as partial replacement of cement and sand together and also MX3 with 15% marble powder as partial replacement of sand, MX4 with 15% marble powder dust as partial replacement of cement and MX6 with 30% marble powder dust as partial replacement of cement and sand together. S.No. Characterist ics Specified value as per IS ...

Research Paper PARTIAL REPLACEMENT OF CEMENT WITH

Particles of this sand have smooth texture and are blackish. Sieve analysis was done to find out fineness modulus which comes out to be 3.14% which is under limit as per IS 383-1970. The test conducted on Sand is shown in Table No. 3. Table 3: Sand Marble powder: Marble powder was collected from

Influence of limestone waste as partial replacement ...

stone waste 25%, 50% and 75% replacement from sand. Twelve mixes incorporating lime stone waste 25%, 50% and 75% replacement from sand with marble powder as additive by percent 5, 10, and 15% by cement weight. Phase II, the above experiment is repeated with the same components but with different content of cement. This content is 450 kg/m3.

(PDF) "Partial Replacement of Cement with Marble Dust Powder"

In order to evaluate the effects of the marble powder on mechanical behaviour, many different mortar mixtures were tested, all prepared with sand to cement ratio of 3:1 at about the same workability.

(PDF) Effect of rice husk ash and marble powder on ...

Marble powder (at 10 and 20% replacement of sand by weight) increased the strength of. concrete, both separately and in combinations with rice husk ash. Usage of 10% MP. showed higher strengths ...

Use of Waste Marble Powder as Partial Replacement in ...

It can be observed that the flexure strength for the concrete mix containing 10% of marble powder dust in cement got increased by the value of 9.2% and for 10% replacement with sand the flexure strength also got increased about 9.3% but it decreased when the mix contains 20% marble powder dust against cement (10%) and sand(10%) about 10%.

Cement Replacement in concrete with Marble Dust Powder

the replacement of cement by marble dust powder we can achieve a greener construction. Fig 2 shows marble dust powder available in processing plant whereas fig 3 shows the Percentage of marble powder 1 2 3 Avg. compressive Strength in N/mm2 0 18.66 24.88 25.33 24.73 26.66 5 28.00 27.55 27.40 10 30.22 28.88 29.92 15 24.88

[PDF] Partial Replacement of Cement with Marble Dust ...

Corpus ID: 136124924. Partial Replacement of Cement with Marble Dust Powder @article{Sahu2016PartialRO, title={Partial Replacement of Cement with Marble Dust Powder}, author={Chandraprabha Sahu}, journal={Imperial journal of interdisciplinary research},

Review Paper On “Effective Partial Replacement Of Cement ...

in marble powder as replacement of cement as compared to normal concrete. But when they replaced sand with marble powder a consider increment in compressive strength was found at an optimum percentage of 20%. 4. Prof. Veena G. Pathan, Prof. Md. Gulfam Pathan , “Feasibility and need of use of Waste marble powder in

(PDF) PARTIAL REPLACEMENT OF CEMENT WITH MARBLE

PARTIAL REPLACEMENT OF CEMENT WITH MARBLE DUST POWDER Address for Correspondence

Experimental study on concrete using waste marble powder ...

Since this concrete is prepared with marble powder as a partial replacement of fine aggregate (Sand) in four different proportions i.e. 10%, 15 % ,20% and 25 % and tested for the period of 7days, 14 days and 28 days. This compressive strength is compared with the conventional concrete i.e. concrete prepared without marble powder.

AN EXPERIMENTAL INVESTIGATION ON PARTIAL

[2] Replacement marble powder up to 5% in the 28 days compressive strength is 28N/mm2. [3] Conventional concrete in the 28 days compressive strength is 25N/mm 2 . [4] As per the study, replacement of marble powder up to 5% is good for construction purpose for

Partial Replacement of Fine Aggregates by Marble Powder

dust used as fine aggregate in replacement of natural sand, as the sand is expensive because of the excessive cost of transportation from natural sources. Marble powder also has cementitious properties and may help in binding the aggregates. The marble powder can improve various properties of concrete viz; compressive strength, flexural

STUDY OF MARBLE POWER AS PARTIAL REPLACEMENT FOR

STUDY OF MARBLE POWER AS PARTIAL REPLACEMENT FOR CEMENT MORTAR USING M-SAND GLADWIN ALX. A 1, BASKAR. ... [1-10].In the studies performed using NA, it was found that the powder increased compactness of the aggregate-cement paste interface, and also improved the modulus of elasticity and early age ... Replacement of Sand by M-Sand Comp. Strength ...

Experimental Utilization of Marble Dust Powder as Partial ...

20% marble powder dust as partial replacement of cement and sand together and also MX3 with 15% marble powder as partial replacement of sand, MX4 with 15% marble powder dust as partial replacement of cement and MX6 with 30% marble powder dust as partial replacement of cement and sand together. S.No. Characterist ics Specified value as per IS ...

Review Paper On “Effective Partial Replacement Of Cement ...

in marble powder as replacement of cement as compared to normal concrete. But when they replaced sand with marble powder a consider increment in compressive strength was found at an optimum percentage of 20%. 4. Prof. Veena G. Pathan, Prof. Md. Gulfam Pathan , “Feasibility and need of use of Waste marble powder in

Properties of concrete incorporating sand and cement with ...

10% marble powder as partial replacement of cement and MX3 with 15% marble powder as partial replacement of sand, MX4 with 15% marble powder as partial replacement of cement and also MX5 with 20% marble powder as partial replacement of cement and sand together and MX6 with 30% marble powder dust as partial replacement of cement and sand ...

Replacement of cement and sand in concrete with Waste ...

marble dust powder or marble waste products. But the combination of replacement of 10% of cement and 10% of sand with marble dust powder or marble waste product, the strength get start to decrease. So that the 20% of combination of cement and sand cannot be replaced by marble waste product or marble dust powder.

An Experimental Investigation on Mechanical Properties of ...

increasing marble powder content when compared with control sample at each curing age. No mortar cube with partial replacement of marble granules conform to the standard of IS:8112– 1989. Surprisingly when sand is partial replaced by marble powder, all mortar cubes except that replacement of 20% does not conform to IS:8112–

AN EXPERIMENTAL INVESTIGATION ON PARTIAL

[2] Replacement marble powder up to 5% in the 28 days compressive strength is 28N/mm2. [3] Conventional concrete in the 28 days compressive strength is 25N/mm 2 . [4] As per the study, replacement of marble powder up to 5% is good for construction purpose for

Experimental study on concrete using waste marble powder ...

Since this concrete is prepared with marble powder as a partial replacement of fine aggregate (Sand) in four different proportions i.e. 10%, 15 % ,20% and 25 % and tested for the period of 7days, 14 days and 28 days. This compressive strength is compared with the conventional concrete i.e. concrete prepared without marble powder.

Marble Powder As A Partial Replacement Of Sand - 1454 ...

Marble Powder As A Partial Replacement Of Sand. V. CONCLUSION From the test results it is clearly evident that granite powder as a partial replacement of sand proves to be beneficial when Durability properties of Concrete is considered. Durability of Concrete using Granite Fines is almost same as that of reference mix (GF0), However at 30% ...

What are the Materials for Replacement of Sand in Concrete ...

4. Granulated Blast Furnace Slag. Granulated blast furnace slag is a waste of steel industry; its use can be best exploited as part replacement of sand in concrete. It can replace sand to the amount of 70 % in concrete mixes. Its Availability is limited, restricted to steel plant area. As Granulated blast furnace slag has high glass content ...

Investigation on Strength Properties of Concrete with ...

fine aggregate (sand) and cement were partially replaced with Granite powder and marble powder. The replacement is done by 5%, 10%, 15%, 20%, 25% of cement by marble powder and 5%, 10%, 15%, 20%, 25% of fine aggregate by granite powder to evaluate the effect of presence of these replacement materials on the strength of specimens.

An Experimental investigation on strengths characteristics ...

characteristics of concrete using as a partial replacement of cement by marble dust powder and sand by stone dust. The Dissertation work is carried out with M 30 grade concrete for which the marble powder is replaced by 0%, 5%, 10%, 15%, 20% by weight of cement. For all the mixes compressive,

Effects of Partial Replacement of Cement with Marble Dust ...

the percentage of marble dust powder for up to 10% partial replacement of cement with marble dust powder. With further increase in the percentage of marble dust powder the split tensile strength of concrete decreases.